Patchers (émulsion + gravillon)

Hydrog
Entretien des routes
Machines à travaux routiers
Patchers (émulsion + gravillon)

INTENDED USE

Patcher Hydrog PA-5000 is intended to repair bituminous surfaces by filling and sealing potholes with stony grit coated by bitumen emulsion. The grit is given by compressed air through the tube into the operating head, in which the grit is coated with bitumen emulsion.

The device can work with two different fractions of grit.

STAGES OF REPAIR THE SURFACE

  • Cleaning of the pothole with compressed air
  • Spraying of the pothole with bitumen emulsion
  • Filling of the pothole with grit coated by bitumen emulsion
  • Strewing of the repaired surface with dry grit

MAIN PARAMETERS

  • Diesel Perkins 4-cylinder liquid-cooled power 44 hp
  • Number of tanks with grit: 1 or 2 (depending on version) with total capacity 5 m3
  • Worm feeders: 1 or 2 (accordingly to the version), independently continuously adjustable
  • Emulsion tank: 1500 l
  • Automatic maintenance-free heating of the emulsion by fuel and disel oil burner
  • Emulsion pump drive: hydraulic
  • Emulsions circulation by working boom
  • Working boom length: 5 meters
  • Control: Ergonomic low voltage control panel in the driver cabin or on working boom (depending on version)

MOUNTING ON CARRIER

  • Working boom at the rear of the vehicle - controlled by the separate operator
  • Working boom at front of vehicle - controlled by the separate operator
  • Working boom at front of vehicle - controlled by the driver